hot work – grinding / cutting energized work asbestos / lead utility outage electrical outage dot road work . The practices were expanded into a comprehensive electrical hot work program that included the philosophy, control, qualification, and safe work methods. When it is necessary to perform work on energized equipment, OSHA 1910.333(a)(2) requires safety-related work practices to be used and NFPA 70E Article 110.8(B)(1) requires an Electrical Hazard Analysis before work is performed on live equipment operating at 50 volts and higher. Use this checklist before you commence work each day to check for hazards that could cause an electrocution. This person must be trained (CPR, ESH 114, 371), qualified, be able to cut off all power sources, and have immediate access to a telephone or radio to call 911 in case of emergency. Live parts shall be de-energized using approved lockout/tagout procedures before work begins on or near the equipment. Electrical Hazard Checklist. The Supervisor Safety Checklist is a useful tool to help supervisors identify unsafe conditions and work practices that are likely to cause injuries. Other questions you can expect from an OSHA inspector include: Processes can sometimes be free flowing entities which give space and creativity to work within, while other times they can be rigid and strict, procedural.
Abstract: An internal review of the safety practices for a large Canadian chemical plant indicated that the established procedures for electrical hot work needed to be expanded and formalized. The safest way to conduct electrical work is to shut off electric power and work on de-energized equipment. Cracks or holes in floors, walls and ceilings (including ductwork) are covered or plugged. How the electrical inspection checklists work. Requirements within 35 ft. of hot work.
An arc flash risk assessment is a process to determine if an arc flash hazard exists. Hot Work Safety Checklist Do welders: Read and follow equipment manufacturers’ instructions?
The checklists are in PDF format and can be completed electronically or printed and used as hard copy. Flammable liquid, dust, lint and oily deposits removed and floor swept clean.
Work practices must establish an electrically safe work condition prior to maintenance or other activities involving electrical installations or equipment. industrial hygiene toxic substances to monitor msds records respirators list: medical questionnaire fit test .
Flammable and ignitable materials and debris have been moved at least35 feet from the hot work area or covered and. loto equipment requirments Do a site walkthrough and inspect the electrical tools and equipment being used (e.g switches, power lines, appliances, installations, wiring, cables and cords). Wear helmets or goggles that protect against infrared rays? Welding and Hot Work, such as brazing or grinding present a significant opportunity for fire and injury. protected with fire resistant materials. Checklist is good for one shift only. Hot work equipment is in good working order.
I verify the above location has been examined.
Initially check if general electrical safety measures are followed. Electrical Inspection Checklist ... and they will personally perform all of the electrical work, including the planning and laying out of the electrical work.
Wear leather aprons, leggings, and sleeves for very hot work? The precautions checked on the Required Precautions Checklist have been taken to prevent fire and permission is authorized for this work. :KHQMRELVFRPSOHWHG FKHFNOLVWZLOOEHUHWXUQHGWR:RUNHU¶V)RUHPDQRU'36 3.
However, sometimes a process needs to manage these two styles to create a strict set of procedures which is still flexible enough to be applied to different situations and variables.
Safety Procedures .